Epsilon
3
Specifications
Frequency Response: 30Hz- 42kHz (±1.5dB)
Recommened Power: Use with amplifiers rated between 100
and 500 watts RMS per channnel
Crossover Frequencies: 150Hz, 500Hz, 3kHz
Sensitivity: 87db @ watt/1 meter
Nominal Impedance: 4 ohms
Driver Compliment: 12” (30.48cm) IMG WOOFER
L-EMIM Mid-bass coupler
EMIM Midrange
(2) EMIT Tweeters
Dimensions (H x W x D): 59¾*" x 18½" x 16¼"
(151.8mm x 47mm x 41.3mm)
Weight: 205 lb (93kg)
* Not including spiked feet. Add approximately
2” for locking ring, spiked feet and cover.
Total: 61¾”H
IMPORTANT NOTICE
There are two versions of the IRS Epsilon system
The following part numbers were changed to reflect this:
EPSILON LOUDSPEAKER (Early) - IF30003
EPSILON SCU (Servo Control Unit) (Early) - IF80008
EPSILON LOUDSPEAKER (Later) - IF30003A
EPSILON SCU (Servo Control Unit) (Later) - IF80008A
The two components cannot be "mixed", i.e. the early version loudspeaker cannot be used with a
later SCU, or vice versa. Damage may result to the Epsilon System or to the customer's power
amplifiers if this is attempted.
To Next Page
Loading...