Infinity Omega - Page 6

6
◆
Omega – Owner’s Manual
Figure 2.
Speaker connection.
Using one length of speaker connecting wire, connect the RIGHT speaker to
your amplifier’s (or receiver’s) RIGHT channel output terminals. Be sure that
strands of the wire do not touch the ground terminal (and be sure to observe
polarity). Even a thin stray wire can cause distortion in the system that would
be very difficult to trace. Speaker Positive should be connected to amplifier
Positive and speaker Negative to amplifier Negative. Connect the LEFT speaker
to your amplifier’s LEFT channel output terminals in a similar manner. (See fig-
ure 2.)
L.F.
OMEGA
EMIM
AMPLIFIER
LEFT
SPEAKER
LEFT
– +
RIGHT
– +
EMIT
+
flat
-
-
flat
NORTHRIDGE, CALIFORNIA, USA
– +
– +
CONNECTIONS USING ASTEREO AMPLIFIER
(Continued)
All manuals and user guides at all-guides.com
all-guides.com