Infinity Omega - Bi-Wiring Omega Speakers

8
◆
Omega – Owner’s Manual
BI-WIRING
Many audiophiles recommend using two connecting wires instead of one
because two wires share current through a greater conducting area. If you wish
to bi-wire your Omega speaker with a single power amplifier, remove the two
shorting straps on the rear of the speaker that separate the woofer and
midrange/tweeter sections of the crossover network. Two parallel speaker wires
are connected to the amplifier’s output (for each channel) and the other ends
of the wires are connected to the woofer and midrange/tweeter sections of the
speaker. (See figure 4.)
L.F.
OMEGA
EMIM
AMPLIFIER
LEFT
– +
RIGHT
– +
EMIT
+
flat
-
-
flat
NORTHRIDGE, CALIFORNIA, USA
– +
– +
Figure 4.
Connecting the speaker for
bi-wire operation.
All manuals and user guides at all-guides.com