Infinity ONE - Initial Device Preparation

Innity:One Manual 19
3.1 Preparing your Innity:One
Note that the DC in adapter included in the package is
approved for your Innity:One; using other adapter may
damage either the Innity:One or other devices attached to it.
1. Plug DC in adapter into the DC in port of your Innity:One.
2. Start charging the battery.
(For rst-time use, you need to turn your Innity:One o󰀨
and charge it for 6 hours. After that you can recharge the
battery as needed.)
3. Power on: Press the power button for 3 seconds to turn on
your Innity:One.
3.
2.
1.