PS28 (120V)
If you have a Dolby
®
Digital or DTS
®
receiver/processor with a low-frequency
effects (LFE) or subwoofer output:
SUBWOOFER OR
LFE OUTPUT
If your receiver/processor does
not contain a Dolby Digital or DTS
processor but has a subwoofer output:
NOTE: Some receivers have one
subwoofer output. In that case, it is
recommended that you use a Y connector
(not included) to maximize performance.
SUBWOOFER CONNECTIONS
CHOOSE THE SUBWOOFER CONNECTION THAT IS MOST SUITABLE FOR YOUR RECEIVER/PROCESSOR
Primus PS28 (120V) OM 10/2/06 10:24 AM Page 5
PS series PS28 subwoofer
To Next Page
Loading...
