Need help?Do you have a question about the Infinity PS212 and is the answer not in the manual?
A comprehensive list of safety guidelines for operating and maintaining the subwoofer, covering points 1 through 13.
Guidelines for safe servicing, installation, and use of replacement parts, covering points 14 through 25.
Introduction to the Infinity PS212 powered subwoofer, highlighting its capabilities and integration into audio systems.
Instructions for unpacking the subwoofer and handling potential transit damage, advising to keep packing materials.
Explains how subwoofer placement affects performance and bass integration with the system, emphasizing careful consideration.
Discusses factors influencing placement, including room acoustics, standing waves, and the need for experimentation.
Detailed explanation of rear panel controls: power switch, inputs, status LED, crossover, level, LFE/normal, and phase switches.
Instructions for connecting the subwoofer to a receiver with an LFE or dedicated subwoofer output for optimal performance.
Instructions for connecting the subwoofer to a receiver with standard subwoofer outputs, covering single sub-out scenarios.
Steps for powering on the subwoofer and understanding its automatic standby mode triggered by signal detection.
Guidance on adjusting subwoofer volume (gain) and phase for optimal bass output and blend with the main audio system.
How to set the crossover frequency for proper bass integration with main speakers, depending on speaker capabilities.
Instructions for cleaning the enclosure and grille, and guidance on when and how to seek professional service.
A summary of the subwoofer's key technical specifications including frequency response, power, dimensions, driver, and weight.
To Next Page
General