[ Edit: 2016/ 6/ 21 Model: 2017MY INFINITI Q50(V37) OM17E00V37U0 ]
seams or lines remaining after road
repairs. (Active Lane Control could
detect these items as lane markers.)
—
On roads where the traveling lane
merges or separates.
—
When the vehicle’s traveling direc-
tion does not align with the lane
marker.
—
When traveling close to the vehicle
in front of you, which obstructs the
lane camera unit detection range.
—
When rain, snow, dirt or object
adheres to the windshield in front
of the lane camera unit.
—
When the headlights are not bright
due to dirt on the lens or if the aiming
is not adjusted properly.
—
When strong light enters the lane
camera unit. (For example, the light
directly shines on the front of the
vehicle at sunrise or sunset.)
—
When a sudden change in bright-
ness occurs. (For example, when the
vehicle enters or exits a tunnel or
under a bridge.)
—
When entering or exiting tollgates.
—
When driving on roads with a
widening or narrowing lane width.
JVS0614X
*
1
Vehicle information display
SYSTEM TEMPORARILY UNAVAIL-
ABLE
GUID-43C8E8CF-B8E1-4C91-BA5B-CBA054808E08
Automatic deactivation
GUID-4E07DD9F-CB1E-4107-83D2-7E76282657B5
Active Lane Control is not designed to
operate under the following conditions:
. When the Vehicle Dynamic Control
(VDC) system (except TCS function) or
ABS operates.
. When you operate the lane change
signal and change the traveling lanes
in the direction of the signal. (Active
Lane Control is deactivated for approxi-
mately 2 seconds after the lane change
Starting and driving 5-33
Condition:
To Next Page
Loading...