[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
4-42 Monitor, climate, audio, phone and voice recognition systems
Camera View Priority:
The view shown on the screen at the
beginning of Around View
®
Monitor opera-
tion can be selected in order of priority.
Non-viewable Area Reminder:
With this item turned to ON, the non-
viewable area is highlighted in yellow for
several seconds after the bird’s-eye view is
displayed. It will be shown only the first
time after the ignition switch is placed in
the “ON” position.
Moving Object Detection (MOD):
See “MOD function setting” (P.4-53).
Sonar:
See “Sonar function settings” (P.4-49).
Towing Mode:
See “Sonar function settings” (P.4-49).
Show Camera when Sonar Activate:
See “Sonar function settings” (P.4-49).
Sonar Sensitivity:
See “Sonar function settings” (P.4-49).
AROUND VIEW
®
MONITOR SYSTEM
LIMITATIONS
GUID-31638F13-2897-4315-B427-8DEE0BA51BB5
WARNING
Listed below are the system limitations for
Around View
®
Monitor. Failure to operate
the vehicle in accordance with these system
limitations could result in serious injury or
death.
. Do not use the Around View
®
Monitor
with the outside mirrors in the stored
position, and make sure that the trunk
lid is securely closed when operating the
vehicle using the Around View
®
Monitor.
. The apparent distance between objects
viewed on the Around View
®
Monitor
differs from the actual distance.
. The cameras are installed on the front
grille, the outside mirrors and above the
rear license plate. Do not put anything
on the vehicle that covers the cameras.
. When washing the vehicle with high
pressure water, be sure not to spray it
around the cameras. Otherwise, water
may enter the camera unit causing water
condensation on the lens, a malfunction,
fire or an electric shock.
. Do not strike the cameras. They are
precision instruments. Doing so could
cause a malfunction or cause damage
resulting in a fire or an electric shock.
The following are operating limitations and
do not represent a system malfunction:
. The screen displayed on the Around
View
®
Monitor will automatically return
to the previous screen 3 minutes after
the CAMERA button has been pushed
while the shift lever is in a position
other than the “R” (Reverse) position.
. There may be a delay when switching
between views.
. When the temperature is extremely high
or low, the screen may not display
objects clearly.
. When strong light directly shines on the
camera, objects may not be displayed
clearly.
. The screen may flicker under fluores-
cent light.
. The colors of objects on the Around
View
®
Monitor may differ somewhat
from the actual color of objects.
. Objects on the monitor may not be clear
and the color of the object may differ in
Condition:
To Next Page
Loading...
