EasyManua.ls Logo

Infinity QX30 - Page 160

Infinity QX30
460 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Adjustthe position of allmirrors before driving. Do
not adjust the mirror positionswhile driving so that
fullattention maybegiven to vehicle operation.
INTERIOR REAR VIEW MIRROR
While holding the inside rear view mirror,adjust
the mirror angles until the desired position is
achieved.
EXTERIOR REARVIEW MIRRORS
WARNING
Never touchthe exterior rear view mirrors while
they areinmotion. Doing so maypinchyour fin-
gers or damagethe mirror.
Never drive the vehicle with the exterior rear view
mirrorsfolded.Thisreducesrearviewvisibilityand
mayleadtoanaccident.
Objects viewed in the exterior mirror are closer
than theyappear (where fitted).
The picture dimensionsand distanceinthe exte-
riormirrors are not real.
Adjusting
The exterior rear view mirror remote control op-
erates when theignition switch is in the ACCor
ON position.
1. Move the switch to select the left
j
1orright
mirror
j
2.
2. Adjust each mirror until the desired position
is achieved
j
3.
Defogging
The exterior rear view mirrors will be heated
whenthe rear window defogger switch is oper-
ated.
Folding
Manual type (where fitted):
Fold the outside rear-view mirror by pushing it
towards the rear of the vehicle.
Remote control type (where fitted):
The exterior rear view mirror remote control op-
erateswhen the ignition switch is in the ACCor
ON position.
Brieflypressbutton
j
1.Both exterior mirrors
fold in or out.
CAUTION
Continuously performing the fold/unfold operation of
the exterior rear view mirror maycause the switch to
stop the operation. To restore the switch operation,
put the switch in the neutral position (between OPEN
andCLOSE)before adjusting the mirror position.
SPA2447Z
NIC2636
NIC2638
MIRRORS
3-16 Pre-driving checks and adjustments

Related product manuals