In automaticmode, the settemperature is main-
tained automatically at aconstant level The sys-
temautomatically regulates the temperature of
the dispensed air,the airflow and the air distri-
bution.
The automatic mode functionsoptimally when
the “Cooling withair dehumidification” function
is activated. If desired, cooling with air dehu-
midification canbedeactivated.
Ifyoudeactivatethe “Coolingwith air-dehumidi-
fication” function, the air inside the vehicle will
not be cooled.The air inside the vehicle will also
not be dehumidified.The windows canmistup
more quickly. Therefore, only deactivate the
“Cooling with air-dehumidification” function
briefly.
To set climate control to automatic mode:
Makesure the ignition switch is in the ON posi-
tion.
Set the desired temperature.
To activate: pressthe
m
button The indicator
lamp in the
m
button lightsup.Automatic air
distributionand airflow are activated.
To switch to manual mode: pressthe
m
or
m
button
or
Pressthe
m
or
m
button.The indicator
lamp in the
m
button goes out. Automatic air
distribution and airflow are deactivated.
Settingthe temperature
Different temperatures canbeset for the driv-
er’sand front-passengersides.The set tempera-
ture is automatically maintained at aconstant
level.
Makesure the ignition switch is in the ON posi-
tion.
To increaseorreducetemperature: turn control
j
1or
j
9anticlockwiseorclockwise. Only
changethe temperature setting in smallincre-
ments. Startat22
o
C.
Settingthe air distribution
m
Directs the airflow through the demister
vents.
m
Directs the airflow through the centre
and side air vents.
m
Directsthe airflow through the footwell
air vents.
m
Directs the airflow through the centre
and side air vents as wellasthe footwell
air vents.
m
Directs the airflow through the centre
and side air vents as wellasthe demister
vents.
m
Directs the airflow through the footwell
and demister vents.
m
Directs the airflow through the demister
vents, the centre and side air vents as
wellasthe footwellair vents.
NOTE
Regardlessofthe air distribution setting, air-
flow is alwaysdirected through the side air
vents. The side air vents canonlybeclosed if
theadjusters are turned clockwiseuntil they
engage.
To set the air distribution:
1. Make sure the engine is running.
2. Press the
m
or
m
buttonrepeatedly
until the desired symbol appears in the dis-
play.
Setting the airflow
1. Makesure the ignition switch is in the ON
position.
2. To increaseorreduceairflow: pressthe
m
or
m
button.
Switching the ZONE function on/off
Thisfunction is onlyavailablewith automaticcli-
mate control.
4-42 Displayscreen, heater and air conditioner,and audio system
To Next Page
Loading...