EasyManua.ls Logo

Infinity QX30 - Page 209

Infinity QX30
460 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To activate: pressthe
m
button. The indica-
tor light in the
m
button lights up.The tem-
perature setting forthe driver’s side is not
adoptedfor the front-passenger side.
To deactivate: pressthe
m
button. The indi-
cator lamp in the
m
button goes out. The
temperature settingfor the driver’s side is
adopted for the front-passenger side.
Defogging the windscreen
Youcan usethisfunction to de-icethe wind-
screen or to defogthe inside of the wind screen
andthe side windows.
NOTE
Youshould only select the Windscreen demisting
function until the windscreen is clear again.
Activating the Windscreen demisting
function:
Makesure the ignition switch is in the ON posi-
tion.
To activate: pressthe
m
button The indicator
lightinthe
m
button lights up.
The climate control system switches to the fol-
lowingfunctions:
High airflow
High temperature
Air distributiontothe windscreen and front side
windows
Air-recirculation mode off
NOTE
The Windscreen demisting function automati-
callysets the blower output to the optimum de-
mistingeffect.Asaresult,theairflow mayincrease
or decreaseautomatically after the
m
button
is pressed.
Youcan adjust the blower output manually while
the Windscreen demisting function is in opera-
tion. Pressthe
m
or
m
button.
Deactivating the Windscreen demisting
function:
Pressthe
m
button. The indicator lamp in
the
m
button goesout. Theprevioussettings
are reactivated Air-recirculation mode remains
deactivated.
or
Turn temperature control
j
1or
j
9anticlock-
wiseorclockwise.
Defogging the windows
Windows misted uponthe inside:
1. Activate the
m
Cooling with air
dehumidification function.
2. Activate automatic mode
m
.
3. If the windows continue to mist up, activate
the
m
Windscreen demisting function.
NOTE
Youshould only select thissetting until the wind-
screen is clear again.
Windows misted up on the outside:
1. Activate the windscreen wipers.
2. Set the air distributionto
m
or
m
.
NOTE
Youshould only select thissetting until the windows
areclear again.
Air recirculation mode
Youcan deactivate the flow of fresh air if un-
pleasant odours areentering the vehicle from
outside. Theair alreadyinside the vehicle will
then be recirculated.
If youactivate air-recirculation mode, the win-
dows canmistupmore quickly, in particular at
low temperatures. Onlyuse air recirculation
mode brieflyto preventthe windows misting up.
Activating air recirculation mode:
Mak
esure the ignition switch is in the ON posi-
tion.
Press the
m
button. The indicator light in the
m
button lights up.
Displayscreen, heater and air conditioner,and audio system 4-43

Related product manuals