REAR SEAT HEAD RESTRAINTS
Adjusting the rear seat head restraint
height
Usethe head restraint in the notched stem posi-
tions afterpulling itup from thestowed position
to aposition in whichitlocks securely in place.
•
To raise: pullthe head restraint up to the desired
height.
•
To lower: pressreleasecatch j1and pushthe head
restraint down until it is in the desired position.
Removing and fitting the rear seat
head restraints
Therearheadrestraints on the outer seats can
be removed and refitted. The centre head re-
straint cannot be removed. Forvehicles with
sports seatsnone ofthe rearhead restraintscan
be removed.
Fold the seatbackslightly forward in order to re-
move the head restraint.
•
To remove: pullthe head restraint up to the stop.
Press releasecatch
j
1and pullthe head re-
straint out of the guides.
•
To refit: insertthe head restraint so that the
notches on the bar are on the left when viewed in
the direction of travel.
Push the head restraint down until youhear
it engageinposition.
PRECAUTIONS ON SEAT BELTUSAGE
If youare wearing your seat belt properly ad-
justed, andyouare sitting upright and wellback
in your seat, your chances of being injured or
killed in an accident and/or the severity of in-
jury maybegreatly reduced. INFINITI strongly
en
courages youand allofyour passengersto
buckleupeverytime youdrive, regardlessof
whether or not your seating position includes a
supplemental airbag.
NIC2609
SSS0136Z
Sit uprightand wellback
SEAT BELTS
1-8 Safety — seats, seat beltsand supplemental restraint system
To Next Page
Loading...