VOICERECOGNITION
Symptom Possiblecause Possiblesolution
Thesystem does not operate or fails to interpret
the command correctly.
Theinterior of the vehicle is too noisy.Close the windows or make sure the other
occupantsare quiet.
The fanspeed of the air conditioner is too fast.Decreasethe fanspeed of the air conditioner.
Thenoise generated by driving the vehicle is too
loud.
Reducethe vehicle speed, and then speak the
command.
The voicecommand is spoken in alow voice. Speak the command in alouder voice.
The command is spoken too fast.Speak the command after confirming the follow-
ing: voiceguidanceisannounced, atone sounds,
and an icon on the screen changes fromwhite to
orange.
The command is spoken too slowly.Speak in anatural voicewithout pausing between
words.
The system prompts to repeat acommand. Pronunciation is unclear.Speak clearly.
The command is spoken too late after the tone. Speak the command within 5seconds after
confirming the following: avoiceguidanceis
announced, atone sounds, and an icon on the
screen changes from white to orange.
An improper command is spoken. Speak the command or anumber that is displayed
in white on the screen.
Speak acommand that is shown in the command
list.
The system does not correctly recognise anumber
spoken.
Manynumbers are spoken at once. Placeapause between the appropriatedigits for
correct recognition by the system. When speaking
atelephone number,place apause between area
codes and dial codes, etc.
4-122 Displayscreen, heater and air conditioner,and audio system
To Next Page
Loading...