Instrument cluster:
Unit of measurement for distance: The Display
unit Speed-/odometer function allows youto
choose whether certain displaysappearinkilo-
metres or miles in the vehicle information dis-
play.
1. Pressthe
m
or
m
buttononthe steering
wheel to select the [Settings]menu.
2. Pressthe
m
or
m
buttontoselect [In-
strument cluster]submenu.
3. Press<OK> to confirm.
4. Press the
m
or
m
button to select the
[Display unit Speed-/odometer] function.
Youwillsee the selected setting: [km] or
[miles].
5. Press the <OK> button to changethe setting.
Theselected unit of measurement for distance
appliesto:
•
Digital speedometer in the [Trip] menu.
•
Totaldistancerecorder and the trip meter.
•
Trip computer.
•
Current fuel consumption and approximate range.
•
Navigation instructionsinthe [Navi] menu.
•
Cruise control.
•
Speedlimiter.
•
Intelligent cruise control (ICC).
•
Maintenanceservice intervaldisplay.
Switching the additional speedometer on/off;
(Not available in the United Kingdom).
The [Dig. speedo (mph)] or [Dig. speedo (km/h)]
function allows youtochoose whether the ve-
hicleinformation display in the status area
shows the speed in km/horinmph instead of
theoutside temperature.
1.Pressthe
m
or
m
buttononthe steering
wheel to select the [Settings]menu.
2. Pressthe
m
or
m
buttontoselect [In-
strument cluster]submenu.
3. Press<OK> to confirm.
4. Press the
m
or
m
button to select the
[Dig.speedo (mph)] or [Dig. speedo (km/h)]
function.
Youwillsee the selected setting: [on] or [off].
5. Press the <OK> button to changethe setting.
Selecting the permanent display function; (Not
availableinthe United Kingdom)
Youcan determine whether the vehicle informa-
tion display permanentlyshows the outside
temperature or the speed in mph.
1. Pres
st
he
m
or
m
buttononthe steering
wheel to select the [Settings]menu.
2. Pressthe
m
or
m
buttontoselect [In-
strument cluster]submenu.
3. Press<OK> to confirm.
4. Press the
m
or
m
button to select the
[Permanent display:]function.
Youwillsee the selected setting: [outside
temperature] or [Dig.speedo (mph)].
5. Pressthe <OK> button to save the setting.
Lights
Switching the Adaptive Front Lighting System
on/off:
1. Press the
m
or
m
buttononthe steering
wheel to select the [Settings]menu.
2. Pressthe
m
or
m
button to select [Light]
submenu.
3.Press<OK> to confirm.
4. Press the
m
or
m
button to select the
[Adaptivefront lighting system] function.
If the [Adaptive front lighting system] func-
tion has been switched on, the cone of light
and the
m
symbolinthe vehicle informa-
tiondisplay are shown in orange.
5. Pressthe <OK> button to save the setting.
2-20 Instrumentsand controls
To Next Page
Loading...