InfiRay MH25 User Manual

All rights reserved and shall not be copied and distributed in any form without written permission. 8
5.3 QCM Quick Command Menu
The quick command menu is activated with a short press of the encoder. The QCM
has four functions including NUC (Non-Uniform Calibration), color palette selection,
brightness adjustment, and laser activation. NOTE: The InfiRay USA MH25 does not have
a laser. Only certain models feature a laser, and the MH25 does not. The laser icon may
be present, but there is no laser. Rotating the encoder will toggle functions and a short
press will activate the function. If the encoder is not activated within 5 seconds the QCM
will disappear automatically. Pressing the encoder for 3 seconds will close the QCM.
NOTE: Pressing the encoder for 3 seconds while orienting the MH25 downward will turn
the MH25 off.
NUC - Short press while the lens is facing down will perform silent NUC. All other
orientations will perform shuttered NUC.
Color Palette - White hot/Black hot/Red Hot/Pseudo color).
Brightness - Screen brightness adjustment.
Laser – None NOTE: The InfiRay USA MH25 does not have a laser. Only certain
models feature a laser, and the MH25 does not. Even though there is a menu for it,
there is no laser.

InfiRay MH25 Specifications

General

Brand	InfiRay
Model	MH25
Category	Laboratory Equipment
Language	English