How to fix a fuzzy or cropped image on InFocus IN124STA?
To fix a fuzzy or cropped image on your InFocus Projector, change your computer's resolution setting to match the projector's resolution. You can typically find this setting in your computer's Control Panel under Display > Screen Resolution. Keep in mind that the exact steps may vary depending on your operating system.
What to do if my InFocus IN124STA Projectors shows 'Signal out of range'?
If your InFocus Projector displays 'Signal out of range', press the Auto Image button on the remote. Also, adjust your computer's refresh rate via the Control Panel (Display > Screen Resolution > Advanced Settings > Adapter tab). Note that the exact path may vary depending on your operating system. If the problem persists, you might also need to set a different resolution on your computer.
Why does my InFocus Projectors only show the background, not the desktop icons?
If your InFocus Projector only shows your laptop's background and not the desktop icons, change the Multiple Display setting to 'Duplicate these displays'. In Windows 7, this can be found in Control Panel > Display > Screen Resolution. The location of this setting may vary depending on your operating system.
What to do if my InFocus IN124STA Projectors has no start up screen?
If your InFocus Projector isn't showing a start-up screen, ensure the power cord is plugged into the projector and then press the Power button.
General| Noise Level | 32 decibels |
|---|---|
| White Brightness | 3300 lumens |
| Native Resolution | 1024 x 768 |
| Contrast Ratio | 15000:1 |
| Aspect Ratio | 4:3 |
| Throw Ratio Range | 0.6:1 |
| 3D | yes |
| Focus Adjustment | manual |
| Optical Zoom | none |
| Sound Mode | mono |
| Built In Speakers | yes |
| Speakers Output | 2 watts |
| Remote Control | yes |
| OS Compatibility | windows, mac |
Weight and Dimensions| Depth | 8.7 inches |
|---|---|
| Height | 4.3 inches |
| Width | 11.5 inches |
| Net Weight | 7.1 pounds |
Details on the latest specifications for the multimedia projector.
Connecting the projector to a computer using a USB cable.
Connecting the projector to an electrical outlet.
Connecting the projector to a video source using HDMI.
Connecting the projector using a composite video cable.
Connecting the projector to a video source with a VGA output.
Connecting the projector using component video cables.
Automatic projector shutdown after a period of inactivity.
Procedure for manually turning off the projector and its power.
Connecting audio sources to hear sound through projector speakers.
Steps to resolve issues with audio not being heard.
Provides common adjustments for projector settings.
Settings for Wired LAN and Wireless LAN connectivity.
Steps for connecting and configuring the projector via a wired network.
System requirements and installation for mobile device projection.
Launch EZ Display, enter passcode, and select feature options.
Launch EZ Remote app to enable remote control of the projector.
Instructions for connecting and operating the LiteBoard Wand.
Instructions for safely cleaning the projector lens.
To Next Page