Windows 98, 98SE and ME USB setup
Microsoft Windows 98/98SE/ME needs to install drivers for the first three projector USB devices
(Composite Video, Keyboard, & Mouse) before it detects and installs drivers for the projector itself. The
Wizard for these first three devices can appear in any order.
The USB drivers for composite video, keyboard and mouse use Microsoft default USB device drivers,
which are available on the Windows 98/98SE/ME CD. The device driver "Unknown Device" (the projector)
uses drivers supplied by InFocus.
When you plug the USB connector on the LP500/LP530 DVI Cable connector to the USB port on your
computer, the computer detects new hardware and starts the Add New Hardware Wizard.
To Connect a Composite Device, a Mouse or a Keyboard
NOTE The procedure below shows the process you use to connect a Composite Device. You use the
same steps to connect a Mouse or a Keyboard.
1 When the Add New Hardware Wizard appears, click Next.
To Next Page
