Infortrend EonStor DS S12S-G2240-4 User Manual

Infortrend
Infortrend EonStor DS
S12/ S16/ S24 Series
Hardware Manual
Version 1.1 (July, 2011)

Infortrend EonStor DS S12S-G2240-4 Specifications

General

Brand	Infortrend
Model	EonStor DS S12S-G2240-4
Category	Measuring Instruments
Language	English

Summary

Safety Precautions

Installation and Operation

Provides guidance on installing and operating the EonStor DS RAID system and JBODs.

2 Hardware Installation

2.1 Installation Prerequisites

Lists essential requirements before installing the EonStor DS subsystem.

3 System Connection

3.1 General Considerations on Making Connections

3.3 SAS-Host RAID Connections

3.3.1 SxxS-R/G2240-4 Controllers in DAS (Direct-Attached Storage) Configuration

3.4 iSCSI-Host RAID Connections

3.6 JBOD Connections

3.8 Power Connections

3.8.1 Checklist

4 System Monitoring

4.3 Controller LED

4.4 PSU LED

5 System Maintenance

5.1 Replacing the Controller Module(s): Single / Dual / Simultaneous Upgrade

Provides steps for replacing or upgrading controller modules.

5.4 Replacing the Power Supply Module

5.4.1 Detecting a Failed PSU

Describes methods to identify a failed Power Supply Unit (PSU).

5.6 Replacing a Hard Disk Drive

5.7 Replacing the Enclosure

5.7.1 Differential Diagnosis to Determine Backplane Failure

Explains methods to diagnose potential backplane failures.

6 Appendix

6.1 Technical Specifications

Lists detailed technical specifications for various models and interfaces.

6.2 Pinouts