Need help?Do you have a question about the Infortrend EonStor DS S16E-R2240 and is the answer not in the manual?
General| Brand | Infortrend |
|---|---|
| Model | EonStor DS S16E-R2240 |
| Category | Measuring Instruments |
| Language | English |
Instructions for installing and operating the EonStor DS RAID system and JBODs.
Details of the RAID controller module rear panel, including ports and connectors.
Description of the JBOD controller module rear panel, including ports and LEDs.
Details of Fibre-Host ports (4Gb/s and 8Gb/s) on RAID models.
Overview of system monitoring features like firmware, SANWatch, and LEDs.
Information on hot-swappable components that can be exchanged while the system is online.
Essential requirements before installing hardware components.
Step-by-step overview of the hardware installation process.
Steps and considerations for installing hard drives into the system.
Factors to consider when purchasing and installing hard drives.
Procedure for placing hard drives into the drive trays.
Steps for inserting the drive trays containing hard drives into the enclosure.
Procedure for installing the Cache Backup Module (CBM) on RAID models.
Procedure for removing the RAID controller module from the chassis.
Procedure for re-installing the RAID controller module into the chassis.
Information on Fibre Channel standards, cables, and transceivers.
Information on SAS cables and their compatibility with systems.
Overview of iSCSI connections, cable requirements, and connection types.
HA IP SAN configuration with redundant RAID controllers for high availability.
Fault-tolerant path configuration for single-controller iSCSI systems.
HA IP SAN configuration supporting remote replication.
HA IP SAN configuration with port trunking for remote replication.
Information on hybrid systems featuring FC and iSCSI ports.
Information on SAS cables and connectors for JBOD enclosures.
Information on connecting power cords and performing power-on procedures.
Step-by-step guide for powering on the RAID subsystem and connected devices.
Methods for verifying subsystem status after power-on using monitoring interfaces.
Steps for safely powering down the subsystem and connected devices.
Overview of system monitoring features like firmware, SANWatch, and LEDs.
Details of controller LEDs for RAID and JBOD models.
Details of LEDs on RAID controller modules, including status and CBM indicators.
Procedures for restoring default system settings for dual and single controller models.
Steps for replacing or upgrading RAID controller modules.
Procedure for replacing the DDRII DIMM module on RAID controllers.
Procedures for replacing the Cache Backup Module (CBM) and its components.
Procedures for detecting and replacing a Power Supply Unit (PSU).
Procedure for replacing a PSU on S12x-Rxxxx and S16 RAID series.
Steps for replacing a PSU on S12x-Gxxxx models.
Procedure for replacing a PSU on the S24 RAID system.
Procedures for replacing cooling modules for different series.
Step-by-step guide for replacing a hard disk drive.
Procedure for replacing the entire enclosure, including diagnosis and steps.
Methods for diagnosing backplane failures through differential diagnosis.
Step-by-step procedure for replacing the entire enclosure.
To Next Page