Need help?Do you have a question about the Ingco CS1858 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Power Source | Electric |
| Voltage | 220-240V |
| Blade Diameter | 185 mm |
| Cutting Depth | 65 mm |
| Cutting Capacity at 45° | 44 mm |
Instructions for making parallel cuts using the saw's parallel stop and base plate scale.
Steps to adjust the cutting depth using the locking lever and scale for precise cuts.
Guide to setting the cutting angle between 0 and 45 degrees using the lock screw.
Procedure for safely replacing the saw blade, including necessary precautions.
Details on how to safely switch the circular saw on and off using the interlock button and switch.
To Next Page
