Need help?Do you have a question about the Ingco BMS14007 and is the answer not in the manual?
Explains the symbol for double insulation for enhanced safety.
Symbol indicating the need to consult the instruction manual prior to use.
Symbol indicating compliance with European conformity standards.
Symbol for necessary personal protective equipment (PPE) like safety glasses.
Symbol for environmental protection and proper disposal of electrical waste.
Symbol indicating a safety alert and the use of manufacturer-approved accessories.
Guidelines for maintaining a safe and well-lit work environment to prevent accidents.
Precautions related to electrical connections, grounding, and cord usage to prevent shock.
Advice on staying alert, using PPE, and preventing unintentional starts for user safety.
Instructions on proper tool operation, maintenance, storage, and handling.
Proper clamping, securing, and support for workpieces to ensure stability and prevent hazards.
Guidelines for push cuts, hand placement, avoiding cross-handed cuts, and safe operation.
Inspecting workpieces, clearing the area, and ensuring stable mounting before cutting.
Procedures for clearing jams, safe shutdown, and preventing cut-off piece ejection.
Potential health effects from prolonged exposure to tool vibrations.
Risks associated with broken accessories being thrown during operation.
Potential interference with medical implants due to the tool's electromagnetic field.
Lists model numbers, input power, voltage, and speed.
Details blade diameter, teeth, and mitre/bevel cut ranges.
Specifies dimensions for straight, mitre, bevel, and compound cuts.
Information on the insulation class for electrical safety.
Crucial warning to check all parts before use and replace any missing or damaged components.
Guidelines for a clean, well-lit work area, avoiding hazardous conditions.
Advice on avoiding contact with earthed surfaces to prevent electric shock.
Ensuring bystanders stay clear and proper tool usage.
Using correct tools, proper attire, and essential protective equipment.
Instructions for safe cable management and avoiding damage.
Emphasizing secure workpiece clamping and maintaining proper balance.
Guidelines for tool care, accessory changes, and disconnecting power.
Ensuring switch is off before plugging in and staying alert during operation.
Warnings about using recommended accessories and professional repairs.
Recommended materials for cutting and blade selection advice.
Ensuring guards are in place and blades are properly maintained.
Specifies essential PPE like hearing, eye, and respiratory protection.
Ensuring machine stability, secure fixing, and proper handling during transport.
Importance of adequate lighting and keeping the cutting area clear of debris.
Warnings against using the saw near flammable liquids or for cleaning with volatile solvents.
Removing nails from workpieces to prevent sparking and potential fires.
Definitions for symbols representing volts, amperes, hertz, watts, and speed.
Symbols indicating the need for safety goggles, ear protection, and breathing masks.
Symbols for reading the manual and keeping hands away from the blade.
Guidelines for recycling electrical products and proper waste disposal.
Diagram showing all parts of the mitre saw with corresponding numbers.
Lists spare parts from No. 1 to No. 70 with part descriptions and quantities.
Lists spare parts from No. 71 to No. 131 with part descriptions and quantities.
General| Power Source | Corded Electric |
|---|---|
| No-load speed | 4500 RPM |
| Power | 1400W |
| Voltage | 220-240V |
| Bevel Cutting | 0-45 degrees |
To Next Page
