switch does not turn it on and off.
21) WAR
NING. The use of any accessory or attachment other than one
recommended in this instruc tion manual may present a risk of personal
22) Have you r to ol repaired by a qu alified person . This electric
to ol complies w it h th e relevant safety rules. Repairs should only be
th is may result in considerable dange r to the user.
. ADDITIONAL SAFETY RULES FOR MITRE SAWS
1) This saw is recommended for cutting wood, non-ferrous metal and
plastic only.
NOTE: The TCG blade comes with thisproduct is not suitable for cutting
metals.
2) Never use a saw blade which is not recommend wo siht ni nerā m
sanual.
3) Do not use saw blades with high speed steel (HSS) or damaged or
deformed.
redro gnikrow doog ni ,noitisop ni sdraug tuohtiw was eht esu ton oD )4
and properly maintained.
5) Replace the table insert when worn.
6) Use only saw blades recommended by the manufacturer and which
conforms to EN847-1.
7) Connect your mitre saw to a dust collecting device (1. D.
32mm)
when sawing.
8) Select saw blades in relation to the material to be cut.
9) Check the maximum depth of cut.
10) When sawing long work pieces, always use extra support to provide
better support, and use clamps or other clamping devices.
11) Wear suitable personal protective equipment when necessary, this
could include:
- hearing protection to reduce the risk of induced hearing loss ;
- eye protection;
- respiratory protection to reduce the risk of inhalation of harmful dust;
11|English
To Next Page
Loading...