- gloves for handling saw blades (saw blades shall be carried in a holder
wherever practicable) and rough material.
WARNING!
of loose materials e.g. chips and cut-offs.
Use correctly sharpened saw blades. Observe the maximum speed
marked on the saw blade.
Repairs sh all only be carried out by the laser m anufacturer or an
authorised agent.
morf eceipkrow eht fo strap rehto ro sffo-tuc yna gnivomer morf niarfeR
the cutting area whilst the machine is running and the saw head is not
in the rest position.
operation of the machine.
13) Provide for adequate room lighting at your workpiece or for adequate
lighting of the immediate work area.
14) Refrain from removing any cut-offs or other parts of the workpiece
si daeh was eht dna gninnur si enihcam ehttslihw aera gnittuc eht morf
not the rest position.
tips over or when coming in contact with the saw blade.
17) Remove all nails that may be in the workpiece to prevent sparking
.was ertim eht naelc ot stnevlos elitalov ylhgih ralimis ro renniht reuqcal
19) Keep the saw with proper footing on a table to decrease noise and
vibration.
20) Always use the designated carrying handle for transportation.
12|English
To Next Page
Loading...