Why is my Ingco ID11008 Drill not cutting properly?
If your Ingco Drill isn't cutting properly, it could be due to a dull drill bit. Check the drill bit for sharpness and replace it if it's worn. Also, ensure that the drill is set to forward rotation for normal use.
Ensuring a clean, well-lit, and safe work environment free from hazards.
Guidelines for safe use of power tools related to electrical connections and conditions.
Recommendations for user awareness, protective gear, and proper handling to prevent injury.
Proper procedures for using, maintaining, and caring for power tools.
Additional safety guidelines specifically for operating the impact drill.
Explanation of double insulation and its safety implications for the tool.
Detailed list of the parts that make up the impact drill.
Key performance data and electrical ratings for various drill models.
List of items provided with the drill that enhance its functionality.
Guide for attaching and positioning the auxiliary handle for safe operation.
Instructions on how to set and use the depth gauge for controlled drilling.
Procedure for using the chuck key to insert and tighten drill bits safely.
How to use the power switch and its lock button for continuous operation.
Explanation of how to adjust and use the variable speed control.
Instructions for changing the drill's forward and reverse rotation.
Guide on switching between drilling and hammering modes.
Tips for effective drilling in various materials like masonry, steel, and tiles.
Guidelines for cleaning, storage, and general upkeep of the power tool.
Solutions for common issues like the drill not operating or cutting properly.
To Next Page
General
