Ingenico iSC Touch 250 User Manual

One Blue Hill Plaza, 16
th
Floor, PO Box 1546
Pearl River, NY 10965
1-800-PC-AMERICA, 1-800-722-6374
(Voice) 845-920-0800 (Fax) 845-920-0880
Ingenico iSC Touch 250 with Chase
Paymentech through Datacap
This document provides step-by-step instructions on installing the Ingenico iSC Touch 250, configuring
settings, and processing transactions in CRE/RPE using Chase Paymentech Payments through DataCap.
Note: You must have a Deployment ID for the computer acting as the NetEpay server created prior to
attempting this installation. You must also have a License for each station that is processing
transactions through the NetEpay server. If you do not have them, please contact your reseller or
processor for information on how to obtain them.

Ingenico iSC Touch 250 Specifications

General

Display	5-inch color touchscreen
Connectivity	Ethernet, Wi-Fi, Bluetooth
Security	PCI PTS compliant
Operating System	Linux
Battery	Rechargeable lithium-ion battery
Printer	Thermal printer
Card Readers	EMV chip, magnetic stripe, NFC

Summary

Initial Setup and Prerequisites

Installation Notes

Key notes for installing the Ingenico device and associated software.

Ingenico Device Driver Installation

Installing the Driver

Steps to download, extract, and run the Ingenico USB driver installer.

Configuring Ingenico Port Settings

Identify Assigned COM Port

Find the COM port assigned to the iSC250 using Device Manager.

Installing dsiEMVUS Control Software

Download and Install dsiEMVUS

Download and install the dsiEMVUS control software for Chase Paymentech.

Installing dsiPDCX Control Software

Download and Install dsiPDCX

Download and install the dsiPDCX control software for Chase Paymentech.

Installing NETePay Server Software

Download and Install NETePay

Download and install the NETePay software for the DataCap server.

NETePay Installation Verification

Check Programs and Features

Verify NETePay installation in Programs and Features.

Locate and Run Host Executable

Locate DSINetConnectIP_Host.exe and run it as administrator.

NETePay Merchant Parameter Setup

Setup Merchant Parameters

Click 'Load New Parameters' to configure merchant details.

Attempt Activation and Deployment ID

Attempt activation and enter the Deployment ID on the current page.

NETePay Deployment ID Entry and Verification

Enter Deployment ID

Enter the received Deployment ID and confirm merchant information.

Configuring CRE/RPE for Payments

Access Setup Screen

Navigate to Options/Manager > Setup > Setup Screen to begin configuration.

Configuring Cashback and EBT Sales

Enable Cashback Feature

Set 'Max Debit Cashback' field to enable cashback for debit and EBT sales.

Processing EMV Credit Card Sales

Process EMV Sale with Chip

Ring up a sale, select Credit/Debit, and follow PINpad prompts for EMV chip transaction.

Processing Swiped Credit Card Sales

Process Swiped Sale

Ring up a sale, select Credit/Debit, and swipe the card as prompted.

Processing Manual Entry Credit Card Sales

Process Manual Entry Sale

Ring up a sale, select Credit/Debit, and manually enter card details.

Processing Debit Sales with Cashback

Process Debit Sale with Cashback

Ring up a sale, select Credit/Debit, confirm cashback, and enter amount.

Performing a Batch Settlement

Initiate Batch Settlement

Navigate to Administrative > Credit Card Settlement and click Settle.