Ingenico iSC Touch 250 - Initial Setup and Prerequisites; Installation Notes

3
Revision History
Document Version
Date
Author
Description of Changes
1.0
January 18, 2018
MP
1st Release
Installation Notes:
 The merchant is responsible for contacting their Reseller and obtaining a Merchant Number, as
well as having a Deployment ID created on DataCap’s PSCS Server prior to installation.
 Note: You must be running CRE/RPE version 12.8031 or higher to use this device. To install the
required version of CRE/RPE Windows 7 or above is required.
 The NETePay software only needs to be installed on 1 station which will act as the DataCap
server.
 It is recommended to install the NETePay Software on a back office computer that can act as a
server.
 The ISC TOUCH 250 driver, dsiPDCX software, and dsiEMVUS software needs to be installed on
each station that will process card payments.
 The credit card settlement only needs to be run once from one station.
 Device encryption is configured by the processor prior to deployment.
 The receipt option Suppress Extra Signature Copy is unavailable due to requirements of the
Datacap Platform