Ingersoll-Rand IRN 30HP User Manual

OPERATION AND MAINTENANCE MANUAL
C.C.N. : 22791511
REV. : A
DATE : AUGUST 2006
Ensure that the operator reads and understands the
decals and consults the manuals before maintenance or
operation.
Ensure that maintenance personnel are adequately
trained, competent and have read the Maintenance
Manuals.
Ensure that the Operation and Maintenance manual is
not removed permanently from the machine.
IRN 15 − 18.5 kW (20 − 25 HP)
IRN 22 − 30 kW (30 − 40 HP)

Ingersoll-Rand IRN 30HP Specifications

General

Model	IRN 30HP
Horsepower	30 HP
Compressor Type	Rotary Screw
Max Pressure	125 psi
Air Flow Rate	125 CFM
Voltage	460V
Phase	3
Drive Type	Direct Drive

Summary

Warranty Information

Decals and Safety Symbols

Safety Precautions

Installation and Handling

Site Requirements and Preparation

Electrical Installation Data

Specifies electrical data, fuse ratings, and wire sizing for proper installation.

Connecting and Powering the Unit

Operating Instructions

Basic Operation and Controls

Control Panel and Navigation

Monitoring Alarms and Warnings

Lists and explains common alarms and warnings for machine status monitoring.

Maintenance and Servicing

Maintenance Schedule and Intervals

Outlines routine maintenance tasks and their recommended intervals for service.

Component Maintenance Procedures

Provides step-by-step instructions for filter, coolant, and cartridge replacement.

Cooling System and Drain Servicing

Troubleshooting Guide

Common Start and Operation Faults

Addresses issues preventing startup or causing periodic shutdowns and their remedies.

Performance and Noise Diagnostics

Helps diagnose problems related to current draw, pressure, noise, and leaks.