Ingersoll-Rand QXXD2PT018PQ04 User Manual

TL-VP1T-UIM
Edition 1
October 2021
Save These Instructions
QX Connect Series
User Manual
E

Ingersoll-Rand QXXD2PT018PQ04 Specifications

General

Brand	Ingersoll-Rand
Model	QXXD2PT018PQ04
Category	Power Tool
Language	English

Summary

Intended Use

How to Program

Describes programming via ICS Software or Back Cap Tool Display.

Status LEDs Overview

Explains the four status LEDs on the display module and their meanings.

1. Overview of Menu Screens

2. Getting Started

2.1.1 INSIGHT Connect App Pairing

Explains how to connect the tool using the INSIGHT Connect App via Bluetooth.

2.1.2 INSIGHTqcx Controller Pairing

Details the process for pairing the tool with an INSIGHTqcx controller.

2.1.4 Standalone Basic Mode

2.2 Switching Between Basic and Normal Modes

Provides steps to switch between basic and normal operating modes using password.

2.3 Password Management

Explains the default password and how to enter or change it.

3.1 Setting the Target in Basic Mode

Guides on how to set the target value in basic mode.

3.2 Torque or Angle Mode Selection

4.1 PSet Configuration

Describes Programmable Sets (PSets) and how to select and edit them.

4.1.1 Editing PSet Target

Explains how to edit the target value within a PSet.

4.1.2 Editing Torque High Limit

4.1.3 Editing Torque Low Limit

4.1.4 Editing Angle High Limit

4.1.5 Editing Angle Low Limit

4.1.8 Editing Shift Down Torque

4.1.12 Drive Mode Options

Explains the different drive modes: Ergonomic, Performance, and Productivity.

4.3 Secondary Limits

4.6 Fault/Diagnostics Display

Tool Fault Codes and Troubleshooting

Motor Controller Faults (E-01 to E-0A)

Troubleshooting for various motor controller faults, including calibration, temperature, and torque issues.

Communication and Configuration Faults (A-10 to C-99)

Troubleshooting communication, configuration, and network errors.

Motor Controller Faults (E-0B to E-81)

Firmware Upgrade and Tool Lock Faults