Ingersoll-Rand Sierra SM 132 User Manual

72 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SL, SM & SH 90, 110, 132, 150, 200, 250 & 300 (50Hz)

L, H & HH 125, 150, 200, 250, 300, 350 & 400 (60Hz)

This manual contains

important safety information

and must be made available

to personnel who operate and

maintain this machine.

OPERATION AND MAINTENANCE MANUAL

LIBRO D’USO E MANUTENZIONE

MANUAL DE MANEJO Y MANTENIMIENTO

MANUAL DE OPERAÇAO E CONSERVAÇAO

C.C.N. : 80441306

REV. : D

DATE : JANUARY 2010

en pt it es

ENGLISH

PRINT LANGUAGE

PORTUGUESE

SPANISH

ITALIAN

Table of Contents

Questions and Answers:

A
Adam ContrerasAug 25, 2025
What causes a Ingersoll-Rand Sierra SM 132 Air Compressor to fail to load?
- M
  Michael PetersonAug 26, 2025
  If your Ingersoll-Rand Air Compressor fails to load, start by checking for leaking seals in the hydraulic cylinder. If the cylinder doesn't fully stroke when the 'Load' button is pressed, overhaul the hydraulic cylinder. Also, check for a defective load solenoid valve by removing the tube that runs from the load solenoid valve to the hydraulic cylinder. Start the compressor and press the 'Load' button; if oil doesn't come out of the solenoid valve, replace it.
J
Joseph MartinAug 29, 2025
How to get rid of water in Ingersoll-Rand Sierra SM 132 system?
- S
  Spencer SmithAug 29, 2025
  If you find water in your Ingersoll-Rand Air Compressor system, start by inspecting the moisture separator/drain trap for defects and clean if required; replace if defective. Check the trap drain and drain piping for any blockages and clean them. Inspect and clean the aftercooler core if it's dirty. Ensure all enclosure panels are in place. If the unit lacks an aftercooler, consider installing one. Finally, ensure the drain line/drip leg is correctly installed, sloping the drain line away from the trap and installing a drip leg.
A
Andrea BrewerSep 1, 2025
Why is my Ingersoll-Rand Air Compressor making so much noise?
- U
  uperrySep 1, 2025
  If your Ingersoll-Rand Air Compressor has an excessive noise level, inspect and tighten any loose component mountings. Ensure that all enclosure panels are in place. If the compressor itself is defective, contact an authorized distributor immediately and do not operate the unit.
G
gmitchellSep 5, 2025
What to do with excessive vibration of Ingersoll-Rand Sierra SM 132 Air Compressor?
- H
  Holly NelsonSep 5, 2025
  If your Ingersoll-Rand Air Compressor is experiencing excessive vibration, inspect and tighten any loose components. If the motor or compressor bearing has failed, contact an authorized distributor immediately and do not operate the unit. Inspect the area for other equipment that may be causing external vibrations.
R
rnelsonSep 9, 2025
Why does the pressure relief valve keep opening on my Ingersoll-Rand Air Compressor?
- M
  Mrs. Danielle BurtonSep 9, 2025
  If the pressure relief valve on your Ingersoll-Rand Air Compressor opens, it could be due to the compressor operating over pressure; adjust the controller set points. Alternatively, the valve itself may be defective and require replacement.

Ingersoll-Rand Sierra SM 132 Specifications

General

Model	Sierra SM 132
Category	Air Compressor
Motor Power	132 kW
Drive Type	Direct Drive
Cooling Method	Air Cooled
Lubrication Type	Oil Lubricated
Phase	3
Maximum Pressure	10 bar
Frequency	50 Hz

Summary

Safety

Electrical Safety

Essential precautions for working with electrical systems.

Compressed Air Hazards

Information on the dangers of compressed air and required PPE.

Operating Instructions

Control Panel Overview and Operation

System Status and Menu Navigation

Alarm, Warning, and Troubleshooting Procedures

Identifying, responding to, and resolving system alerts and faults.

Maintenance

Routine Maintenance Schedule and Procedures

Overview of periodic checks, replacements, and safety guidelines.

Air Filter, Oil System, and Gearcase Maintenance

Trouble Shooting

Compressor Start-up and Shutdown Issues

Diagnosing and resolving problems with starting or unexpected shutdowns.

System Air Pressure and Loading Problems

Troubleshooting low pressure, air leaks, and loading failures.

Operational Faults, Noise, and Vibration

Related product manuals

Ingersoll-Rand Sierra SM 110

Ingersoll-Rand Sierra SM 45

Ingersoll-Rand Sierra SM 55

Ingersoll-Rand Sierra SM 75

Ingersoll-Rand Sierra SM 250

Ingersoll-Rand Sierra SH 132

Ingersoll-Rand Sierra H 50

Ingersoll-Rand Sierra H 60

Ingersoll-Rand Sierra H 200

Ingersoll-Rand Sierra H 125

Ingersoll-Rand Sierra SL 150

Ingersoll-Rand Sierra SL 250