Ingersoll-Rand TAM9A0C60V51DA User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and
air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered
equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the
literature and on the tags, stickers, and labels that are attached to the equipment.
June 2017
1188--GGJJ8822DD11--11BB--EENN
Variable Speed Air Handlers
Convertible 2 — 5 Ton
TAM9A0A24V21DA
TAM9A0B30V31DA
TAM9A0C36V31DA
TAM9A0C42V41DA
TAM9A0C48V41DA
TAM9A0C60V51DA
NNoottee:: “Graphics in this document are for representation
only. Actual model may differ in appearance.”
NNoottee:: For use with BAYEA series heaters ONLY
Installer’s Guide

Ingersoll-Rand TAM9A0C60V51DA Specifications

General

Brand	Ingersoll-Rand
Model	TAM9A0C60V51DA
Category	Air Handlers
Language	English

Summary

Installation Essentials

Safety Warnings and Precautions

Essential safety guidelines and warnings to prevent injury and equipment damage during installation.

Unit Design and Preparation

Information on unit structure, cabinet access, and preliminary preparation steps before installation.

Installation Configurations

Details on setting up the unit for vertical and horizontal airflow, including four-way conversion.

System Connections

Ductwork and Refrigerant Lines

Procedures for connecting ductwork and handling refrigerant lines, including brazing and leak checks.

Condensate Drain Piping

Guidelines for installing the condensate drain system to ensure proper water removal.

Electrical and Controls

Low and High Voltage Wiring

Instructions for proper electrical wiring, covering both low and high voltage connections.

System Controls and Interface

Guide to the display assembly, technician menus, configuration, and fault reporting for system operation.

Operation and Final Checks

Filters and System Charging

Information on filter installation and required system charge adjustments for optimal performance.

Start-up, Sequence, and Checkout

Procedures for system start-up, understanding operation sequences, fault reporting, and performing final checkout.