Need help?Do you have a question about the Ingersoll-Rand Xe-90M and is the answer not in the manual?
General| Brand | Ingersoll-Rand |
|---|---|
| Model | Xe-90M |
| Category | Control Systems |
| Language | English |
Reduces incoming voltage to 115Vac for the control system.
Electronic device conducting current in either direction when triggered by the controller.
Provides dry contacts for remote warning and trip notification.
Monitors dryer high pressure, stops dryer if pressure is too high.
Triggered by high discharge pressure and closed condensate drain contact for extended period.
Controller has four digital outputs for various control functions.
Monitors inlet vacuum pressure for filter health and butterfly valve operation.
Monitors incoming air temperature at the package inlet.
Addresses warnings related to inlet filter status and vacuum levels.
Indicates a problem with a temperature or pressure sensor being missing or broken.
Triggered by loss of AC input voltage below 100 VAC during operation.
Prevents startup if air end discharge temperature is excessively high.
Prevents startup if sump pressure exceeds a specified limit before starting.
To Next Page
