90 Options and programming methods
Anti-intrusion control panels
7-18
Shortcuts
This section allows you to setup all of the available shortcuts.
Via Keypad
1. Accessing the “Shortcuts” section:
Type-in Code
(Installer PIN)
, PROGRAMMING Shortcuts .
2. Use keys and to select the shortcut thenpress .
Description
This is the editable label which identifies the shortcut.
Icon
This section allows you to select the icon you wish to represent the scenario, simply by
indicating the icon number (refer to Appendix B, Shortcuts at default):
1. Use keys and to scroll across the digits of the number.
2. Use the number keys ( , etc.) to edit the number.
3. Press to confirm and exit.
Via PC
Select an item from “SmartLiving System - Shortcut icons” from the tree menu on the
left, then go to the “Parameters settings” template on the right.
7-19
Expansions
This section allows you to programme the parameters of the expansions.
Via Keypad
Type-in Code
(Installer PIN)
, PROGRAMMING Expansions .
Enable/disable
This section allows you to add/remove expansions from the I-BUS configuration, by
means of keys and .
ChoosePeripheral
This section allows you to select an expansion and program the descriptions and the
options:
• Description - editable field for the name of the expansion.
• Options - keys and allow you to enable activation of the expansion
buzzer on activation of terminal 1 configured as an output.
Via PC
To Next Page
Loading...
