Injecta ELITE PR User Manual

0000137062 Rev. 3.0
2
Instruction Setting
Functions:
• Calibration (Press Cal Key for 3 Seconds):
o Select the calibration routine pH or Redox by Up or Down key.
o Standard Routine calibration pH probe is 7 and 4 buffer solution and Redox 465 mV buffer
solution
• Set Point (Press Set Key):
o Press Set Key and choose SetPoint and adjust value with Up or Down Key before press
Enter and confirm.
!
!"#$%&'(###$&&#'(#
!
!"#$)*"+####$),#"+#
• Press Cal and Set Key (both) for 5 Seconds and run Program Setup:
o
-./0.1'#2345 (Press Enter to set the following Item)
!
61405103# (It’s possible to have 5 language EN, IT, SP, DE, FR)
!
738/9#231:5.3
•
:3;"/<4;###$%&#'( (Adjust value with enter and up or down key)
It’s possible to adjust from 0 to 1000 mV value for Redox
•
:"#;="3###>/? (Adjust value LOW or HIGH)
•
/@1#;<'3#&&&#'<4 (Adjust value OFF or set Time)
•
1>1.'#A148##&&&#.9 (Adjust value from 100 to 300 mV )
!
"+#231:5.3
•
:3;"/<4;####$)*"+ (Adjust value with enter and up or down key)
It’s possible to adjust from 0 to 14 pH value.
•
:"#;="3###1B<8 (Adjust value ACID or ALKA)
•
/@1#;<'3#&&&#'<4 (Adjust value OFF or set Time)
•
1>.#A148##&&&#"+ (Adjust value from 1 pH to 3 pH)
•
C3'"##D%EF#(Adjust value with enter and up or down key) pH
measure only.
!
G>/?#(Adjust value with enter and up or down key Enable or Disable)
• It’s possible to enable(ON) or disable (OFF) signal input
!
F1><A.1;</4#"./A3 (Adjust value with enter and up or down key)
!
G5>> (pH 7 and 4, Redox 465 mV buffer solution)
!
H1:= (pH 7, Redox 465 mV buffer solution)
!
I@@ (Disabled)
!
-1::?/.8 (Adjust value with enter and up or down key, standard value 0000)
• Save and escape Program setup with ESC key
o
H9<;######:1(3 (Adjust value with up or down key and confirm with enter key)
• Priming Pump Keep Press UP Key for 1 seconds and priming redox pump
o
".<'<40#####$&&'(
• Priming Pump Keep Press Down Key for 1 seconds and priming pH pump
o
".<'<40#####$)D"+
• Lock pump function
o Press Up and Enter (both) after 5 second flash
79#!;/" press again to unlock
o Press Down and Esc (both) after 5 second flash
"J#!;/" press again to unlock
• The unit doses in proportional mode respect at Set Point (minimum distance 25%, maximum
distance 90% of 10 minutes time period dosing)
Note: The unit in program menu to go out in automatic mode after 1 minutes of wait time, the unit doesn’t save nothing.

Injecta ELITE PR Specifications

General

Brand	Injecta
Model	ELITE PR
Category	Water Pump
Language	English