Injecta ELITE PR - pH Probe Calibration

0000137062 Rev. 3.0
4
pH Probe Calibration
Wash
Keep probe into Buffer solution
F1><A.1;</4!
Press Cal Key 3 Seconds
Set pH calibration
5
-.3::#B1>
Calibration During 1 minutes
K1<;########,&:##
6
$"J#L51><;=#M&&N!
Quality Probe
7
Wash
Keep probe into Buffer solution
*"J###-.3::#B1>
Calibration During 1 minutes
K1<;########,&:##
10
*"J#L51><;=#M&&N
Quality Probe
11
Wash
Press Enter Key to save and exit
14
Normal Status
15
Note:
If you have setting Calibration = Easy the function has 1 point calibrate only 7 pH buffer solution.