Need help?Do you have a question about the Inkbird Hioazo HO-SC-6W and is the answer not in the manual?
General| Connectivity | Wired |
|---|---|
| Display Type | LCD |
| Power Supply | AC 100-240V 50/60Hz |
| Power Source | AC Power |
| Batteries | No batteries required |
| Material | Plastic |
| Display Resolution | 0.1°C / 0.1°F |
| Temperature Range | -50°C to 99°C (-58°F to 210°F) |
Details adapter input/output, controller input, and zone output voltage specifications for the smart sprinkler controller.
Lists required iOS/Android versions and 2.4GHz Wi-Fi for app installation and setup.
Covers Wi-Fi standards (802.11 B/G/N20), channels, security modes, and Bluetooth support.
Provides the physical size and weight specifications of the smart sprinkler controller.
Explains the functions of Wi-Fi, Setting, Start/Stop buttons, and zone indicators on the controller.
Details the common, zone, master valve, sensor, and power input terminal connections.
Provides email support for issues not resolved by the manual or setup video.
Steps to test, mark wires, and remove the existing sprinkler controller before installation.
Instructions for marking screw locations, drilling, and installing anchors for wall mounting.
Guidance on hanging the new controller and securing it with screws at the bottom.
Explains how to connect common wires from valves to the controller's common port C.
Instructions for connecting zone wires from sprinklers to the numbered terminals 1-6.
How to connect the optional master valve to the 'M' port on the controller.
Details connecting a pump start relay to the controller for water pump activation.
Explains connecting the sensor wire to the 'S' and '24VAC-' ports for sensor functionality.
Steps to connect the power adapter to the controller and outlet, with a safety warning.
Guide to downloading the INKBIRD app and pairing your smartphone with the controller.
Steps for adding the HO-SC-6W controller to your INKBIRD app after initial setup.
Instructions on turning on the smart sprinkler controller before proceeding with app connection.
How to check the controller's Wi-Fi indicator and select the corresponding status in the app.
Details on using Fast Flash and Slow Flash modes for Wi-Fi connection setup.
Step-by-step guide to connect the controller using the SmartConfig mode with Wi-Fi details.
Confirmation of successful device pairing via the SmartConfig connection method.
Step-by-step guide to connect the controller using the AP connection mode with Wi-Fi details.
Instructions to connect your phone to the controller's Wi-Fi hotspot for the AP connection.
Confirms successful device pairing after connecting via the AP connection method.
Explains the main interface of the INKBIRD app, showing zones, weather, and mode selections.
Details how to configure settings like rain sensor, master valve, seasonal adjustment, and power.
Guide to setting up zone descriptions, watering periods, and start times for scheduled watering.
Displays finished/remaining watering times and options to stop manual irrigation.
Instructions on operating in automatic mode, advancing zones, and stopping irrigation.
Solutions for water supply issues and problems with loose or incorrectly connected wires.
Troubleshooting steps for corroded wires, rain sensor activation, and jumper issues.
Details the 2-year warranty coverage and the process for repairs or replacements.
Instructions on how to use the irrigation schedule table to plan watering for each zone.
To Next Page
