Inkbird ISV-200W - Icons in this Manual; Product Specifications

Length of the Cable: 47.2"/1.2m
Temperature Control Range:
32℉~194℉ ( 0℃~90℃)
Temperature Control Accuracy: 1℉/0.1℃
Temperature Display Accuracy: 1℉/0.1℃
Time Setting Range: Max 99 hours and 59
minutes
Time Setting Minimum Interval: 1 minute
Reminder: There will be hint tone when the
water temperature reaches the set
temperature or the countdown ends.
Water Shortage Protection: If the water level
is below the minimum scale line, the device
will automatically stop working and alarm.
Waterproof Level: Non waterproof
Heating Power: 1000W
Input voltage: (US) AC 120v 60Hz, (EU, UK,
AU) AC 220~240v 50Hz
Length of the Cable: 47.2"/1.2m
Temperature Control Range:
32℉~194℉ ( 0℃~90℃)
Temperature Control Accuracy: 1℉/0.1℃
Temperature Display Accuracy: 1℉/0.1℃
Time Setting Range: Max 99 hours and 59
minutes
Time Setting Minimum Interval: 1 minute
Reminder: There will be hint tone when the
water temperature reaches the set
temperature or the countdown ends.
Water Shortage Protection: If the water level
is below the minimum scale line, the device
will automatically stop working and alarm.
Waterproof Level: Non waterproof
Heating Power: 1000W
Input voltage: (US) AC 120v 60Hz, (EU, UK,
AU) AC 220~240v 50Hz
Length of the Cable: 47.2"/1.2m
Temperature Control Range:
32℉~194℉ ( 0℃~90℃)
Temperature Control Accuracy: 1℉/0.1℃
Temperature Display Accuracy: 1℉/0.1℃
Time Setting Range: Max 99 hours and 59
minutes
Time Setting Minimum Interval: 1 minute
Reminder: There will be hint tone when the
water temperature reaches the set
temperature or the countdown ends.
Water Shortage Protection: If the water level
is below the minimum scale line, the device
will automatically stop working and alarm.
Waterproof Level: Non waterproof
Heating Power: 1000W
Input voltage: (US) AC 120v 60Hz, (EU, UK,
AU) AC 220~240v 50Hz
Run/Stop Button
Set Time
Current Temperature
Set Temperature
+/Wi-Fi Reset Button
1.1 Icons in this Manual
1.2 Specifications
Working State
Set Button
Remaining Time
-/Parameter Setting
Wi-Fi Connection
Status
2
Length of the Cable: 47.2"/1.2m
Temperature Control Range:
32℉~194℉ ( 0℃~90℃)
Temperature Control Accuracy: 1℉/0.1℃
Temperature Display Accuracy: 1℉/0.1℃
Time Setting Range: Max 99 hours and 59
minutes
Time Setting Minimum Interval: 1 minute
Reminder: There will be hint tone when the
water temperature reaches the set
temperature or the countdown ends.
Water Shortage Protection: If the water level
is below the minimum scale line, the device
will automatically stop working and alarm.
Waterproof Level: Non waterproof
Heating Power: 1000W
Input voltage: (US) AC 120v 60Hz, (EU, UK,
AU) AC 220~240v 50Hz
4.2 Connect the Sous Vide to your
phone
4.2.1 Fast Flash Mode
1. Please register an account before using
the InkBird Pro app. Select your Country/
Region, enter your e-mail, then a verification
code will be sent to your mailbox, enter it to
confirm your identity and the registration is
done.
2. Open the app and click “ + ” to start the
connection.
4.2 Connect the Sous Vide to your
phone
4.2.1 Fast Flash Mode
1. Please register an account before using
the InkBird Pro app. Select your Country/
Region, enter your e-mail, then a verification
code will be sent to your mailbox, enter it to
confirm your identity and the registration is
done.
2. Open the app and click “ + ” to start the
connection.
4.2 Connect the Sous Vide to your
phone
4.2.1 Fast Flash Mode
1. Please register an account before using
the InkBird Pro app. Select your Country/
Region, enter your e-mail, then a verification
code will be sent to your mailbox, enter it to
confirm your identity and the registration is
done.
2. Open the app and click “ + ” to start the
connection.
4.2 Connect the Sous Vide to your
phone
4.2.1 Fast Flash Mode
1. Please register an account before using
the InkBird Pro app. Select your Country/
Region, enter your e-mail, then a verification
code will be sent to your mailbox, enter it to
confirm your identity and the registration is
done.
2. Open the app and click “ + ” to start the
connection.