Need help?Do you have a question about the Inkcups ICN-B100 and is the answer not in the manual?
Describes various applications of pad printing technology.
Explains the basic process of pad printing.
Details the methods of inking the plate in pad printing.
Explains how ink is picked up by the pad and transferred.
Discusses pad printing as a thin film process and factors affecting it.
Lists essential items needed for a pad printing job.
Describes different types of etched plates used in pad printing.
Details the function and properties of the silicone rubber pad.
Discusses pad printing inks and selection criteria.
Lists different types of pad printing machines and systems.
Highlights the advanced features of the ICN-B100 pad printer.
Provides detailed technical specifications for the ICN-B100 model.
Shows a diagram of the machine's main components from the left.
Shows a diagram of the machine's main components from the right.
Illustrates the components of the ink cup system.
Provides the wiring diagram for the main circuit board.
Shows the wiring diagram for the machine's lighting lamps.
Guides on installing the machine and performing initial setup.
Instructions for installing the ink cup and steel plate.
Details on adjusting the ink cup position for optimal performance.
Procedures for safely removing the ink cup and steel plate.
Instructions for installing and positioning the printing pad.
Guidance on installing moulds on the worktable.
Steps for setting and adjusting the worktable position.
How to select and set printing programs on the machine.
Adjusting ink pick up and print frequency settings.
Configuring continuous or single-cycle printing modes.
Adjusting pad stopping position for single-cycle prints.
Instructions for printing or inking the plate only.
Setting the delay time for the pad's movement.
How to manually control pad movement for checks.
Information on the built-in print counter and reset function.
Instructions for using the foot switch for machine control.
Location and use of the emergency stop switch.
Explanation of the side protection covers and their function.
Adjusting air control valves to change pad speed.
How to use the "LAMP" button to illuminate the printing area.
General advice for maintaining the pad printing machine.
Solutions for common printing issues and their causes.
Solutions for machinery malfunctions and their causes.
Exploded view and parts list for the tooling table assembly.
Exploded view and parts list for the ink plate mount assembly.
Exploded view and parts list for the pad mount assembly.
Exploded view and parts list for the cup drive assembly.
Exploded view and parts list for the carriage assembly.
Exploded view and parts list for the right wing assembly.
Exploded view and parts list for the left wing assembly.
Exploded view and parts list for the air intake assembly.
Exploded view and parts list for the pad height adjustment assembly.
Exploded view and parts list for the safety guard door bracket.
Exploded view and parts list for the control panel assembly.
Exploded view and parts list for the power panel assembly.
Exploded view and parts list for the air control panel assembly.
Exploded view and parts list for the main machine assembly (part 1).
Exploded view and parts list for the main machine assembly (part 2).
Exploded view and parts list for the foot pedal assembly.
To Next Page
General