EasyManuals Logo

InMotion E3000 User Manual

InMotion E3000
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
FUNCTION INSPECTION:
Visually inspect the InMotion® E3000 Compact Strider to verify that assembly is as shown in the above
illustration. Check the function of the InMotion® E3000 Compact Strider. If you have good balance and
are familiar with the InMotion® E3000 Compact Strider, stand on the foot pedals. If you do not have
good balance, sit in a chair and place feet on the foot pedals. Slowly move your highest foot forward and
follow the natural path of the machine. Turn the crank slowly through one complete revolution to verify that
the drive train functions properly. Adjust the TENSION KNOB(21) and verify that the resistance changes.
CAUTION: Locate and read the WARNING LABEL(55) on the InMotion® E3000 Compact Strider.
Make sure that all users read the WARNING LABEL(55).
SET UP INSTRUCTIONS
8
Place the InMotion® E3000 Compact Strider in the area where it will be used. It is recommended that
the InMotion® E3000 Compact Strider be placed on an equipment mat. The InMotion® E3000 Compact
Strider is approximately 24.3 inches long x 17.5 inches wide x 11.4 inches tall. (These dimensions may vary
up to one inch.) Make sure that adequate space is available for access to move around and emergency
dismount from the InMotion® E3000 Compact Strider. A minimum of 20 inches on at least one side and
20 inches either behind or in front of the InMotion® E3000 Compact Strider is required for safe operation.
LEVELING: Adjust the location of InMotion® E3000 Compact Strider to ensure InMotion® E3000
Compact Strider sits on the oor without rocking.
MOVING: Grasp the handle on the top of the product to move the InMotion® E3000 Compact Strider.
Do not use the PEDAL ARMS(3,4) to move the InMotion® E3000 Compact Strider. The
PEDAL ARMS(3,4) will move and may pinch your hand or ngers.
Equipment Mat
Handle
USING THE RESISTANCE TUBES
The InMotion® E3000 Compact Strider includes two RESISTANCE TUBES(69). These RESISTANCE
TUBES(69) add upper body toning to your cardiovascular workout. The resistance tubes can be used during
your elliptical workout either while standing or while seated. The length of the adjustable hand grips can be
adjusted by moving the buckles to other positions.
OPERATIONAL INSTRUCTIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InMotion E3000 and is the answer not in the manual?

InMotion E3000 Specifications

General IconGeneral
BrandInMotion
ModelE3000
CategoryHome Gym
LanguageEnglish

Related product manuals