InMotion P2 Series User Manual

. rnrin
The IMMOTION P2 series electric bikes provide three riding modes which can be switched by the rider as needed by a mobile
PP connected to the bike.
.1 iing
. co mode Power assistance and throttle start is relatively soft. Only when the bike speed reaches km/h, the throttle can start.
The maimum speed of riding is limited to km/h. nder same conditions, pure power or power assistance range in the eco
mode is even larger.
2. Common mode Power assistance and throttle start is slightly strong. hen the bike speed is km/h, the throttle can also start.
The maimum speed of riding is limited to 2km/h.
. treme speed mode Power assistance and throttle start is stronger. This mode ensures the maimum performance of the
motor under the premise of riding safety. The maimum speed of riding is up to km/h. Note that under same conditions, the
etreme speed mode will reduce the range of the bike.
iarning
hen the bicycle learning mode is selected using the IMMOTION PP, the power assistance function is turned off, and the speed
is limited to  km.
i
ach IMMOTION P2 electric bike has a uniue code which is labeled on the frame in front of the taillight. The frame also has a
uniue code that is engraved on the bottom bracket of the frame.



InMotion P2 Series Specifications

General

Brand	InMotion
Model	P2 Series
Category	Bicycle
Language	English