1. Product Introduction
This manual is applicable to INMOTION P2 manufactured by Shenzhen INMOTION Technologies Co.,Ltd.
2. Safe Driving Precautions
The following components and parts are included when the product leaves the factory spact between words.Please check after
unpacking. If there are any missing components and parts, please contact the dealer or after-sale service department
Warning
se of unauthorized parts and components or incorrectly installed parts and components may result in damage to P2 or even
personal inury. In order to ensure uality and safety, all parts of P2 will be subect to the approval of INMOTION Technologies Co.,
Ltd. and assured to be correctly mounted to P2.
Please do not try to ride on a P2 that is not correctly, effectively and completely installed.
o not disassemble, refit P2 without permission, or it will cause irreparable damage of P2 and may result in personal inury.
3
3UJKR
45
6
6GXZY
3GOTHUJ_
'JGVZKX
;YKXSGT[GR
,UUZVKJGR
9GJJRK
7[GTZOZ_
VI
VI
VI
VI
VGOX
VI
To Next Page
Loading...
Need help?
General
