9
Improper storage shortens the life of built-in lithium batteries or causes other hidden dangers. Please keep the INMOTION SCV V5 in a
dry room at suitable temperature and humidity. If it is not used for a long time, please fully charge its battery at room temperature and
at least once every month later.
3.2. Air Inflation , Inner and Outer Tire Replacement
If the tire pressure is insufficient, please conduct air inflation in time. The factory tire pressure of INMOTION SCV V5 is 2.8Bar by default.
If the tire of INMOTION SCV V5needs to be replaced due to tire burst or other reasons, contact the dealer authorized by INMOTION or
the after-sales service department of INMOTION for maintenance.
3.3. Pedal Tightness Adjustment
Riders will feel uncomfortable if the pedals of INMOTION SCV V5 become loose, and will even fall under severe condition. If the pedals
are loose, please use a M10 Allen driver and a M6 Allen driver respectively to tighten the screws on the axis and on the side edge of the
axis. Please develop a habit of checking all parts of the INMOTION SCV V5 before using.
3.4. Precautions for Cleaning and Use
·Before cleaning the V5, shut down the body, pull up the charging wire, and close the charging port. During cleaning, make sure that
water does not flow into the battery-charging port.
·Use a soft cloth dipped with soapy water or clean water to scrub the outer cover of the INMOTION SCV V5. Do not use high-pressure
water jet to flush the INMOTION SCV V5.
·The waterproof and dustproof level of the INMOTION SCV V5 is IP55, which means splash-proof and dustproof. Therefore, it is not
allowed to dip the INMOTION SCV V5 in water, which may cause permanent damage to the V5.
·Please do not drive the INMOTION SCV V5 to pass through the deep-water zone (more than 70mm in depth).Please do not drive in a
rainstorm, so as not to fall down or cause damages to the V5 because of soak in the water.
To Next Page