1.3.Handle bar and assist Mode
INMOTION SCV V5provides optional handle bar that must to be purchased from INMOTION and installed by users themselves. The assist
mode enables the system to provide proper riding force at a lower power and help users push NMOTION SCV V5 easily when users do
not want to ride or when the condition is not suitable for riding (for instance, insufficient electric quantity, steep slope, wet and slippery
ground, sand, bumpy road, crowded environment, etc.), which greatly improves the portability.
1.4.Button for Preventing Tire Rotation
Due to the unique algorithm of INMOTION SCV V5, if the body angle varies after the V5 body lifts off the ground under normal startup
state, motor spinning accelerates until the V5 is shut down. If being placed on the ground during motor acceleration, the V5 is likely to fly
off due to the friction between wheels and ground, and there is the risk of running into others in some cases, such as elevators, stairs,
getting on or off the bus, or crowed places.
The anti-spinning key below the body handle is designed for the INMOTION SCV V5 according to its characteristics. When the user holds
the handle to lift up the V5, the key will be automatically triggered, and the V5 will enter the sleep state. In the meantime, the motor will
no longer rotate to avoid spinning accordingly. Remove your hand from the handle key to let the V5 fall to the ground again. The V5 will
return to normal condition for continual use.
The “Button for Preventing Tire Rotation” function is enabled by default when INMOTION SCV V5 leaves the factory. You need to shut
down this function on the mobile APP if i learning rope for operation is installed on the handle. Users need to know the above functions
and agree to accept the relevant legal liability statements when using this function.
1.5.Over speed Protection
INMOTION SCV V5 limits the maximum riding speed to avoid dangers caused by too fast riding. When the V5 riding speed reaches the
4
To Next Page
Loading...