INNO VIEW 3 - Chapter 1: Technical Specifications; Applicable Fiber Type; Splice Loss; Splice Mode

8
Technical Specications
Applicable ber type
•
SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653)
/ NZDS(ITU-T G.655)
•
Fiber count: Single
•
Applicable ber cables: 0.25mm - 3.0mm / Indoor cable
•
Applicable ber diameter: Cladding diameter: 80~150μm,
Coating diameter: 125~1000μm
Splice loss
Measured by cut-back method relevant to ITU-T standard:
•
SM : 0.03dB
•
MM : 0.02dB
•
DS : 0.05dB
•
NZDS : 0.05dB
•
G.657 : 0.03dB
Splice mode
•
Maximum 128 splice modes
•
Internal splice data storage: 10,000
•
Splicing time: SM Quick mode: 7s
Heat oven
•
5 applicable protection sleeve: 20mm, 30mm, 40mm, 50mm, 60mm
•
Heating time: 8- 900s
•
Typical heating time: 30s
•
Heat mode: Various heat modes available
•
Heat oven: VIEW 3 special heat oven
1