Innodisk EGSS-32R1 - User Manual

www.innodisk.com
Headquarters (Taiwan)
5F., No. 237, Sec. 1, Datong Rd.,
Xizhi Dist., New Taipei City 221,
Taiwan
Tel: +886-2-77033000
Email: sales@innodisk.com
Branch Offices:
USA
usasales@innodisk.com
+1-510-770-9421
Europe
eusales@innodisk.com
+31-040-282-1818
Japan
jpsales@innodisk.com
+81-45-594-7581
China
sales_cn@innodisk.com
+86-755-21673689
www.innodisk.com
© 2014 Innodisk Corporation.
All right reserved. Specifications
are subject to change without
prior notice.
June 26, 2015
Mechanical Drawing
Specifications
Features
Form-
Factor
M.2
2242-B-M
Input I/F
SATA
III
Output I/F
SATA
III
Output Connector
SATA
7pin x 2
Bridge
JMS562
TDP
1.65W (3.3V x 498mA)
Dimension (
WxLxH
)
22 x 42 x 11mm,
Weight: 5.5g
Temperature
Operation: STD: 0
°C ~ +70°C Storage: -55°C ~ +95°C
Environment
Vibration: 5G @7~2000Hz, Shock: 50G @ 0.5ms
Notes
1. RAID
Mode Setting:
[J2:J1]
RAID0: 23:23,
RAID1: 23:12, PM: 12:12
2.
Press tact switch SW1 for reset.
M.2 2242 to Dual SATA III RAID Module
−Supports SATA to dual SATA III Port Multiplier.
−Supports H/W RAID 0/1 over SATA.
−30µ golden finger, 3 years warranty.
−Industrial design, manufactured in innodisk Taiwan
EGSS-32R1
Order information
EGSS-32R1-C1
M.2 to Dual SATA III RAID Module
SATAIII 7pin male
Tact switch
Pin header
SW1

Innodisk EGSS-32R1 Specifications