Need help?Do you have a question about the Innodisk EMP2 SERIES and is the answer not in the manual?
General| Form Factor | M.2 2280 |
|---|---|
| Flash Type | 3D TLC |
| Operating Voltage | 3.3V ± 5% |
| PCIe Lanes | 4 |
| Operating Temperature | -40°C ~ 85°C |
| Storage Temperature | -55°C ~ 95°C |
| Shock | 1500G/0.5ms |
| Vibration | 20G |
| MTBF | 3, 000, 000 hours |
| Features | Thermal Throttling |
Guide to installing the EMP2 serial driver and its associated software on Windows operating systems.
Details on using software to switch between RS232, Loopback, RS485HD, and RS485FD modes.
Instructions for changing serial modes using hardware DIP switches for specific models.
How to enable the RS-485 checkbox in Windows Device Manager for Half Duplex operation.
Step-by-step guide for compiling and installing the EMP2 serial driver on Linux platforms.
Instructions for installing the command-line tool to manage EMP2 device modes in Linux.
How to use `emp2init` and `emp2cfg` commands to set serial port modes in Linux.
How to apply hardware DIP switch changes and reset configuration using `emp2init reset` in Linux.
To Next Page