Need help?Do you have a question about the Innodisk E2SS-32R2 and is the answer not in the manual?
General| Brand | Innodisk |
|---|---|
| Model | E2SS-32R2 |
| Category | Control Unit |
| Language | English |
Innodisk E2SS-32R2 is a 2.5" SATAIII module for dual M.2 SSDs, offering RAID and expansion.
Lists key features like SATA to dual SATA III, H/W RAID 0/1, LED pin header, and warranty.
Details form factor, input/output interfaces, and physical dimensions of the device.
Covers power requirements, voltage, and power consumption details.
Defines the operating and storage temperature and humidity limits for the device.
Identifies and describes the function of various connectors and switches on the PCB.
Details the signal names and pin numbers for the mSATA connectors (CON1, CON2).
Specifies the pin configuration for the 7+15 SATA connector (J6).
Lists the pin assignments for USB 2.0 and LED functions on connector J5.
Provides mechanical dimensions and layout for the I/O connectors.
Shows the mechanical drawing and layout for the 2*5P pin header.
Details the mechanical drawing and layout for the M.2 SMD connector.
Presents the mechanical drawing and layout for the SMD slide switch.
Provides overall mechanical dimensions and mounting details for the E2SS-32R2.
Identifies key components and screws required for the installation process.
Details the process of attaching M.2 SSDs to the RAID module using flat screws.
Guides on securing the RAID module to the button cover using appropriate screws.
Explains how to attach the top cover to the button cover using black screws.
Instructions for preparing a new disk and backing up existing data.
How to check RAID status and use iRAID Tool to diagnose disk damage.
Guides on physically replacing a damaged disk with a new one in the module.
Explains how to monitor the disk rebuild process and check the status via iRAID Tool.
Confirms the successful completion of the rebuild process with normal status.
To Next Page