Scope of delivery
The scope of delivery of the
innogy eStation and accessories
is described below.
Components included
in scope of delivery:
• innogy eStation: Charging station for
charging electric vehicles according to
the following technical data
• Two keys
• Operating instructions
• Installation instructions
Further required accessories should
be ordered separately:
• Foundation: A charging station founda-
tion or, alternatively, a mounting frame
is required to ensure the proper stabil-
ity of the innogy eStation.
• Ram protection: In addition, ram
protection is required to protect the
domestic connection against external
infl uences.
innogy eStation (IEIA-152)
General safety instructions
The innogy charging station is EMC tested and
meets the requirements of EMC Directive
2014/30/EU and the Low Voltage Directive
2014/35/EU. Instructions in manuals for
(mobile/wireless) communication devices
must be observed when using in the vicinity
of (mobile/wireless) communication devices.
Following each charging, the charging cable
connected to the innogy eStation is disconnect-
ed electrically from the power supply network
to ensure voltage-free plugging of the charging
cable at all times.
The electric vehicle is connected with the innogy
eStation via a charging cable for charging. As
the operator of the charging station, you may
have to inform the user in an appropriate man-
ner about the correct use of the charging cable.
innogy bears no liability for any damage occur-
ring due to the improper use of charging cables.
Troubleshooting
Rectifying of faults must be undertaken by an
electrical engineering specialist.
To Next Page
Loading...