Innogy eStation - Technical Data

Technical data

Operating instructions
General technical data
Dimensions:
Installation:
Weight:
(H x W x D) 1,460 x 300 x 200 mm
Free-standing on an appropriate concrete base or on a
viable concrete base using a mounting frame
innogy eStation: ~ 42 kg
Ram protection: ~ 18 kg
Foundation: ~ 100 kg
Protection class IP54
Temperature range −25 °C to +40 °C
Grid connection
Power supply:
Required connected load:
400 V 3~ + PE+N
22 kW for simultaneous maximum power at both charging points.
Lower connected loads can be confi gured.
Charging points and
vehicle connection
No. of charging points:
Output:
Vehicle recognition:
Two charging sockets (type 2)
Max. 11 kW (confi gurable, 400 V 3~, 16 A) per charging point
Via pilot signal pursuant to IEC 61851-1:2012
Display Multicoloured LED indicates charging, charge status and
error message
Protection technology Integrated for each charging point: Personal protection: RCD type
B (30 mA for DC residual currents and 6 mA for AC residual
currents). Cable protection: circuit breaker.
Authentication/
activation
Via key switch
Communication Pilot signal pursuant to IEC 61851-1:2012
Foil wrapping Weather and graffi ti-resistant foil (can be ordered separately).
Individual customer branding possible.
Access authorisation Double-locking system with two 31.5 mm single profi le cylinders
!