Operating instructions
The operating mode is indicated by
the LED above the key switch.
The following modes are indicated:
“Off”
LED display is off
Charging station operational
LED indicator illuminates white
Vehicle connected
LED indicator illuminates green
Charging active
LED indicator illuminates blue
Charging impossible
LED indicator illuminates red
Charging station faulty
LED indicator fl ashes red
Risks for humans and the environment
• Stumbling injury due to improper laying of
cables
• There is a danger of electric shock where
defective cables are involved.
• There is a risk from road traffi c when installing
and removing the cable in areas where there is
heavy traffi c.
Protective measures and rules of conduct
• The charging cable should be routed so
that no risk of stumbling occurs due to the
installation.
• When plugging in the charging cable, ensure
that only charging cables are used that are
visibly and technically sound and intended for
charging.
• Pay particular attention to road traffi c on busy
roads.
• Do not attempt to repair defective cables.
Conduct in event of malfunctions
• Have defective charging stations repaired
immediately by appropriate skilled personnel.
• Do not establish an electrical connection if
charging cables or charging points are
defective.
Maintenance or replacement of charging
cables
• Defective cables must be repaired or replaced
by a qualifi ed person.
• Defective cables must not be used any further
on the eStation.
Conduct in case of accidents, fi rst aid
• Switch off the power.
• Provide fi rst aid and secure the danger
zone. Emergency no.: 112
• Make an emergency call and initiate rescue.
Using the charging cable
The following information is provided for the
safe laying of cables for charging of electric
vehicles on the innogy charging station. The
user of the eStation is responsible for the safe
handling of charging cables.
!
!
!
!
!
To Next Page
Loading...