Innokin iTaste VTR - Page 5

OPERATION GUIDE
When a baery is installed, the LED light will blink from red to yellow to green and the digital display
will show 88.8. the iTaste VTR will be in off mode.
1. Function key
2. Rotational wheel
3. Digit LED display
6. Clearomizer/Atomizer
7. Cone adapter connector
( Will fit iClear10, iClear16,
and iClear30 clearomizers,
T2,T3 , Genesis system etc,
as well as standard 510 accessories
8. Battery cap
9. Battery cap release switch
6. Clearomizer/Atomizer
4. LED light display
5. Power button
1
2
1 2 3 4 5
Press the “Funcon Key” for 2 seconds to check Ohms of your aached atomizer or clearomizer
(please note the digit screen will stay display Ohms unl you release buon)
To display the current voltage or waage seng, press and hold the “funcon key” for one second
and release. The digital screen will display the volts or was seng.
5/EN-5 6/EN-6